home *** CD-ROM | disk | FTP | other *** search
- Installing CheckStar III
- =====================================================================
- STEP-1: Make a backup copy of CheckStar III. Refer to your DOS manual
- for instructions. Put the original diskette in a safe place.
- Never run ANY program from the original disk.
-
- STEP-2: Insert a backup copy of CheckStar III in drive A.
- Type INSTALL and press ENTER key.
-
-
- STEP-3: HARD DISK USERS:
- ---------------
- Type CS and press the ENTER key to start the program.
-
- FLOPPY USERS:
- -------------
- Get a new formatted floppy disk for the data. Insert backup
- copy of CheckStar III in drive A or drive B.
- Type CS and press the ENTER key to start the program.
-
- ---------------------------------------------------------------------
- Getting help:
- -------------
-
- - As you will notice, CheckStar III is totally menu driven. We have
- spent much time to make this program easy to use. At first you may
- have some difficulty remembering where to find what you need. But
- give yourself some time and we are certain that within a few days,
- running the CheckStar III will be a piece of cake. There is a file
- called HELP.DOC on this disk. Some features are explained for first
- time users. To get a print out of this file, at the DOS prompt
- enter PRINT HELP.DOC and press the return key. Or you may always
- call us for anything you don't understand.
-
- - In any event, if you have questions or problems, don't hesitate to
- call us.
-
- Registering CheckStar III
- ---------------------------------------------------------------------
- You are permitted to use this program for a reasonable time to
- evaluate its functions and potential usefulness to you. If you wish
- to continue to use CheckStar III, a registration fee of $20 is
- required along with your name and address to:
-
- Salim Sindhi
- P.O.Box 55135
- Houston, TX 77255
- (713) 464-3713